Mercedes-Benz S-Class by Inden Design

Share Button


Mercedes-Benz S500 has been upgraded by Inden Design. The exterior gets a bodykit, the interior has been changed and performance is improved slightly as well.

The widely known beyond the borders of the Hessian Haiger-Flammersbach noble tuner INDEN Design specializes in the just discussed vehicles, located very near the top category. In this case, Joachim Inden, which is known for so many masterpieces, has undertaken to rebuild the S500 of W221 series from Stuttgart to the facelift version of the S65 AMG. The modifications at the front, the side sills and rear diffuser are associated with the highly visible and distinctive quality of INDEN-Design. Of course, daytime running lights were also installed, and tail lights and mirrors were retouched. The vehicle is completed with the chrome parts, coated with charcoal-gray matte film.

The performance increase up to 420 bhp, in particular thanks to a stainless steel exhaust system with two AMG tailpipes left and right, almost inevitably involves lifting of the Vmax limiter. Due to the increased power, the braking system was “converted” to the S600 V12 BiTurbo model with 6-piston front calipers and 4-piston brake calipers. The right set of rims for the perfect vehicle in dimension of 10.5 x 20″ with tires in 265/30-20 at the front and 275/30-20 – at the rear axle was fully installed. The standards of agility are set by lowering by 2 inches.

As might be expected, the interior was also not spared. The A, B and C pillars, the headliner at the dashboard and door panel are trimmed with two-color leather in combination with black Alcantara. In addition, all former wood pieces were replaced with black carbon parts. The speedometer change to a 360 kph-scale closes the series of changes inside the vehicle.

Posted: March 16th, 2011
at 11:03pm by The Sub-Editor

Tagged with , ,


Categories: Mercedes-Benz

Comments: No comments



 

Post a comment: